Operation Manual

3 Service Search
3.1 Searching for broadcasting services 27
6. If you set the Network Search option to On, the digital re-
ceiver will check up the up-to-date channel information
as searching services, but it takes rather longer time.
7. Set the Modulation option to match to that of your de-
sired transponder. If the transponder is of the DVB-S2
standard, you should set this option to DVB-S2 QPSK or
DVB-S2 8PSK. Then the FEC option and the Pilot option
will become enabled. You also should set these options
correctly.
NOTE
You may get transponder information from a satellite maga-
zine or website such as http://www.satbeams.com or http:
//www.lyngsat.com.
Fastscan feature
* If your providing operator is one of the following, you are
able to use the Fastscan feature:
• Canal Digital
• TV VLAANDEREN
• TeleSAT
• AustriaSat
• Skylink / CS Link
Searching single service of a transponder
To search single service of a transponder, take the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Advanced, and then press
the




OK button to diaply additional options.
3. Choose your desired transponder at the Frequency op-
tion or enter it with the numeric buttons.