Operation Manual

3 Service Search
3.1 Searching for broadcasting services 23
NOTE
You cannot use both DiSEqC switch and SCR switch at the
same time.
3.1.2 Configuring DiSEqC 1.2 settings
Your motorized antenna will turn toward your desired satel-
lites horizontally by DiSEqC 1.2.
When you switch to a service, if it is not
provided by the current satellite, it will take
longer time than usual because the antenna
has to turn to its position.
To use the DiSEqC 1.2 protocol,
select the Installation > Motor-
ized DiSEqC 1.2 menu. You
should see a screen like the left
figure. At first you have to set
the Motorized DiSEqC 1.2 op-
tion to Enable.
To get the correct position of your desired satellite, take the
following steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Select the tuner that is connected to the motorized an-
tenna at the Tuner Select option.
3. Set the DiSEqC Command Mode option to User.