Operation Manual

10 TAP
97
are placed in any other folder, they will be ignored.
Before you start the TAP, you will need to load the TAP file into
the program file menu by doing the following:
1. Press the button and then the or button to dis-
play the program files list.
2. Insert the USB with the TAP file into your unit.
3. On the remote, press the




SAT button. Press the




OK on
top of the name of your external hard disk.
4. Use the navigation keys to highlight the TAP file.
5. Press the yellow button on top of the file.
6. It will prompt you that the file will be moved into the
program files folder. Press




OK .
NOTE
If you would like the TAP to start when the unit starts up,
move the TAP file into the Auto Start folder in the Program
Files menu.
To run a TAP in the digital receiver, take the following steps:
1. Press the button and then the or button to dis-
play the program files list.
2. Place the highlight bar on a program file you want to run,
and press the




OK button to start it up.
3. If it is a running-in-the-background program, its entry
in the list gets marked in green when it starts. You may
have several programs run in the background at a time.
4. To stop a program running in the background, place the
highlight bar on its entry in the list, and press the




OK
button; otherwise you can stop it with the




EXIT button.