User Manual

Tighten the Wheel Magnet onto spoke and align with sensing point on sensor.
3
Unscrew the wheel magnet
to install on spoke.
Pre-t Sensor and Rubber Bracket on left rear
chainstay (non-drive side) and trim excess rubber
from bracket. Insure the Topeak logo is facing up.
Install zip ties loosely to allow sensor placement.
2
Top View
GB
Tech: Bluetooth® Smart super low energy technology
Battery Lifetime (approx): 1800 hours
(5 years with 1hr/day use)
Battery: CR2032 x 1 pc (included)
Transmisson Range: <10 meter (33 ft)
Waterproof: IPX 7
Weight: 21g / 0.74 oz
Operating temperature: -10º C ~ 50º C (14º F~122º F)
SPECIFICATION
Cadence Sensor
Sensing Point
Speed Sensor
Sensing Point
Cadence Magnet
Holder
6mm 8mm
Zip Tie
Rubber
Bracket
Cadence Magnet Set (A)
for pedal axle hexagon socket
Wheel Magnet Set
Rubber Bracket Set
Cadence Magnet Set (B)
for crankarm
Cadence
Magnet
Zip Tie
Cadence
Magnet
Sticker
Sync to PanoBike App and other Apps with Bluetooth® Smart (BLE 4.0) connection program.
INSTALLATION
TIPS : Proper distance between Sensor and Magnet : < 30mm
Install Cadence Magnet on left crankarm near
pedal as shown. Do not tighten zip ties
completely to allow magnet placement.
Cadence Magnet Set (B)
OPTION
A
OPTION
B
Cadence
Magnet
Cadence
Magnet
Cadence Sensor
Sensing Point
Cadence Sensor
Sensing Point
Top View
Top View
1
For Round Spokes
For Bladed Spokes
User's Guide
PanoBike Speed & Cadence Sensor
IMPORTANT NOTE
Align Cadence Magnet
with Cadence Sensor
Sensing Point as shown
to insure magnet does
not interfere with
Speed Sensor.
IMPORTANT NOTE
Align Wheel Magnet with Speed
Sensor Sensing Point as shown to
insure magnet does not interfere
with Cadence Sensor.
IMPORTANT NOTE
Align Cadence Magnet with Cadence Sensor
Sensing Point as shown to insure magnet
does not interfere with Speed Sensor.
Speed Sensor
Sensing Point
Preset suitable 6 mm or
8mm Cadence Magnet Set.
Cadence Magnet Set (A)
(6 mm or 8 mm)
6 mm 8 mm
Art no. : TPB-CS01