Version: V1.00.
LAUNCH Phoenix Pro User Manual Copyright Information Copyright © 2016 by LAUNCH TECH. CO., LTD. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of LAUNCH. The information contained herein is designed only for the use of this unit. LAUNCH is not responsible for any use of this information as applied to other units.
LAUNCH Phoenix Pro User Manual Important Safety Precautions Important: To avoid personal injury, property damage, or accidental damage to the product, read all of the information in this section before using the product. y Never collide, throw, or puncture X-431 PADIV, and avoid falling, extruding and bending it. y Do not insert foreign objects into or place heavy objects on your device. Sensitive components inside might cause damage.
LAUNCH Phoenix Pro User Manual y Always perform automotive testing in a safe environment. y If the diagnostic connector remains unused for a long period of time, it is suggested to unplug the connector from vehicle’s DLC to conserve battery power. y Wear an ANSI-approved eye shield when testing or repairing vehicles. y The vehicle shall be tested in a well ventilated work area, as engines produce various poisonous compounds (hydrocarbon, carbon monoxide, nitrogen oxides, etc.
LAUNCH Phoenix Pro User Manual y When reconnecting the ECU harness connector, be sure it is attached firmly, otherwise electronic elements, such as ICs inside the ECU, can be damaged. FCC Warning Note: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
LAUNCH Phoenix Pro User Manual TABLE OF CONTENTS 1 INTRODUCTION .............................................................................................. 2 1.1 PRODUCT PROFILE ...................................................................................... 2 1.2 FEATURES ................................................................................................... 2 1.3 TECHNICAL SPECIFICATIONS ........................................................................
LAUNCH Phoenix Pro User Manual 4.2.2 Function menu ................................................................................. 19 4.3 DIAGNOSIS METHODS ................................................................................ 20 4.4 CONNECTIONS ........................................................................................... 21 4.4.1 Preparation ...................................................................................... 21 4.4.2 DLC location ..............................
LAUNCH Phoenix Pro User Manual 9.3.6 Exit from current account................................................................. 45 10 MY REPORT ................................................................................................ 46 10 OTHERS ....................................................................................................... 49 10.1 EMAIL ...................................................................................................... 49 10.1.
LAUNCH Phoenix Pro User Manual 1 Introduction 1.1 Product Profile X-431 PADIV is an evolutionary smart solution for heavy-duty truck diagnosis based on the multitask-capable Android operating system. Using the powerful 8-core 2.0GHz processor and a 12 inch HD capacitive touch screen, combined with the best possible coverage of OEM-level diagnostics, X-431 PADIV delivers diagnostic functionality which helps to diagnose vehicle issues more efficiently.
LAUNCH Phoenix Pro User Manual 4. Equipped with USB port for connecting USB devices and other add-on modules such as Scopebox, Sensorbox and Batterybox. 5. Web browser: Users can make online search and visit any website.
LAUNCH Phoenix Pro User Manual 1.3 Technical Specifications A. X-431 PADIV Tablet Item Description Operating system Android 4.1 CPU 8-core Processor, 2.0GHz Display 10.1 inch touch screen with 1920 x 1200P resolution Memory 2GB Hard disk 64GB (Expandable to 128GB via TF card) Connectivity y Ethernet/Wi-Fi (802.11 b/g/n) y USB: 2.0 y Bluetooth 2.0 Camera 2.0MP front-facing camera + 8.0MP rear-facing camera Sensor Gravity Accelerometer Audio Input/Output y Microphone y Speakers y 3.
LAUNCH Phoenix Pro User Manual Communication via Bluetooth(with an effective distance of 30m), USB cable Dimension(L*W*H) 204 x 110mm x 45mm Working Temp. -10℃ ~ 55℃(14 ~131℉) Storage Temp.
LAUNCH Phoenix Pro User Manual 2 Knowledge of X-431 PADIV X-431 PADIV is mainly composed of the X-431 PADIV tablet and a VCI (Vehicle Communication Interface) module. y X-431 PADIV tablet – the central processor and monitor for the system (See Chapter “2.1”). Fig. 2-1 X-431 PADIV tablet y VCI module – the device for accessing vehicle data (See Chapter “2.2”). Fig.
LAUNCH Phoenix Pro User Manual 2.1 X-431 PADIV Tablet 2.1.1 Front & Rear Views Fig. 2-3 1 LCD Touch Screen 2 Front Camera 3 Rear Camera 4 Air Intake Vent 5 Camera Flash 6 Adjustable kickstand Flip out it to any angle and work comfortable at your desk, or hang it on automotive part.
LAUNCH Phoenix Pro User Manual 2.1.2 Top View Fig. 2-4 1 USB1 Port Only reserved for Micro USB cable. 2 USB2 Port To connect USB add-on modules. While extending X-431 PADIV function, it is to be connected to Scopebox, Sensorbox or Batterybox. 3 DC IN Port To connect the included power adaptor. 4 Reset Switch 5 VOLUME +/- Key To adjust the volume. 6 Ethernet port To connect Ethernet cable for wired network. 7 SIM Card Slot (Only reserved for dedicated SIM card.
LAUNCH Phoenix Pro User Manual HDMI interface. 2.2 VCI Module Fig. 2-5 VCI module 1 DC-IN power jack For connecting the power adaptor or cigarette lighter/battery clamps cable to obtain power. 2 LED screen Indicates the working status of the VCI module and X-431 PADIV tablet. There are total 5 lines on the screen. It is defined as follows: Vehicle connection): If the module Line 1( is not properly connected to the vehicle’s DLC, “3” will change into “2”. Line 2: the serial number of the VCI module.
LAUNCH Phoenix Pro User Manual USB connection): If the VCI module Line 5( is in Bluetooth mode, “3” will change into “2”. 3 USB port For connecting it to the X-431 PADIV tablet to perform vehicle diagnosis. 4 Diagnostic socket For connecting the diagnostic cable. 2.3 Package List Common accessories for each X-431 PAD IV are same, but for different destinations, the accessories of X-431 PAD IV may vary.
LAUNCH Phoenix Pro User Manual 3 Preparations 3.1 Charging X-431 PADIV Choose the included power adaptor to charge the X-431 PADIV tablet: Connect one end of the power adaptor to DC IN port of the tablet, and the other end to the appears on the screen, it indicates it is being charged. If the logo AC outlet. If changes into , it indicates that the battery is fully charged. Disconnect the power adaptor from the AC outlet. 3.
LAUNCH Phoenix Pro User Manual 3.4 Tips On Finger Operations Single-tap: To select a item or launch a program. Double-tap: To zoom in so that the text on a webpage appears in a column that fits your device’s screen. Long press: Tap and hold on the current interface or area until a contextual menu pops up on the screen, and then release it. Slide: To jump to different pages. Drag: Tap the desktop icon and drop it to other location.
LAUNCH Phoenix Pro User Manual 3.6 Screen Layout On-screen keys and status bar are as follows: 1 Tap 2 Tap to capture the current screen and all captured screenshots are stored in the Screenshots folder. 3 shows whether the diagnostic connector is connected properly or not. 4 Tap 5 Tap to display a list of applications that are currently running or recently used. To open an application, tap it. To remove an application, swipe it upwards. 6 Tap 7 Tap to visit the official website.
LAUNCH Phoenix Pro User Manual 3.10 Set Screen lock This function is designed to lock the screen and buttons to avoid accidental operations while X-431 PADIV keeps unused. 1. On HOME screen, tap Settings > Security > Screen lock. 2. Choose the desired screen lock mode and follow the on-screen instructions to finish your setting. Note: You are recommended to set screen lock as “None” since X-431 PADIV is a frequently used diagnostic tool. 3.
LAUNCH Phoenix Pro User Manual 4 Initial Use 4.1 Getting Started For new users, please follow the operation chart shown in Fig. 4-1 to start using X-431 PADIV. Fig. 4-1 Note*: If “VIN Scan” function is performed, this step shall not apply. 4.2 Register & Download Diagnostic Software 4.2.1 User registration On the home screen, tap the application icon to launch it, and then tap “Login” to enter the login interface of diagnosis software.
LAUNCH Phoenix Pro User Manual Fig. 4-2 1. If you are a new user, tap “New Registration” to enter registration page. See Fig. 4-3. Fig. 4-3 In Fig. 4-3, fill in the information in each field. Note: To obtain better service and more functions, please enter the real information.
LAUNCH Phoenix Pro User Manual Fig. 4-4 Tap “Shop Logo” to upload a picture from the local storage or launch the camera to take a photo. After inputting, tap “Save”. All the information about your workshop will be appended to the diagnostic report once a diagnostic session is generated. In Fig. 4-4, input the Serial Number and Activation Code, which can be found in the password envelope. Product SN Product SN Activation code Fig. 4-5 Note: To exit and activate it later, tap “Skip”.
LAUNCH Phoenix Pro User Manual Fig. 4-6 To download the diagnostic software, tap “Yes” to enter the download page. Tap “No” to download and install it later. On download page, tap “Update” to start downloading. To pause downloading, tap “Stop”. To resume it, tap “Continue”. Once download is complete, the system will install the software package automatically. Notes: y In process of download, please make sure the tablet has a strong Wi-Fi signal.
LAUNCH Phoenix Pro User Manual 4.2.2 Function menu Swipe the screen from the right to display the function menu. It mainly includes the following items: Fig. 4-7 Name Description HD_OBD Provides a quick way to check for DTCs, isolate the cause of the illuminated Malfunction Indicator Lamp (MIL), check monitor status, verify repairs and perform a lot of emission-related services. Diagnose Configures X-431 PADIV to operate as a diagnostic tool.
LAUNCH Phoenix Pro User Manual Remote Diagnosis This option aims to help repair shops or technicians to get the repair job fixed faster. Community A repair platform specially designed for technicians to publish vehicle issues and exchange the repair skills. Diagnostic Feedback To feed back the recent 10 diagnostic logs to us for issue analysis. Toolbox Includes browser, oscilloscope, sensor, multimeter, battery, etc. My Report To view and manage all diagnostic reports. 4.
LAUNCH Phoenix Pro User Manual X-431 PADIV tablet. If no Bluetooth setting is done before diagnostic software is launched, you can also configure it while using the software. y To obtain stable communication, you are strongly recommended to perform the vehicle diagnosis via USB cable. In this case, the USB cable is required to connect the VCI module and the X-431 PADIV tablet. 4.4 Connections 4.4.1 Preparation Normal testing conditions y Turn on the vehicle power supply.
LAUNCH Phoenix Pro User Manual Fig. 4-9 B. Cigarette Lighter Cable: Connect one end of the cigarette lighter cable to vehicle’s cigarette lighter receptacle, and the other end to the DC-IN port of the VCI module. Fig. 4-10 C. Battery Clamps Cable: Connect one end of the battery clamps cable to vehicle’s battery, and the other end to DC-IN port of the VCI module. Fig.
LAUNCH Phoenix Pro User Manual 5 Diagnosis & Reset 5.1 Start Diagnostics 2 approaches are provided for you to access the vehicle diagnostic software. Choose any one of the following ways: 5.1.1 Quick VINScan VINSCAN enables the technician to quickly detect vehicles, scan all the diagnosable ECUs on every vehicle and run diagnostics on the tested system. Tap “Vehicle Scan” on the function menu to enter the desired VIN scan mode. Auto VIN scan (OBD VIN) and manual input (INPUT VIN) are available. Fig.
LAUNCH Phoenix Pro User Manual firewall under the hood. Tap “INPUT VIN” and a screen similar to Fig. 4-12 will appear: Fig. 5-2 Input the VIN, and tap “Confirm” to directly enter the diagnostic software of the vehicle. 5.1.2 Manual diagnosis In this mode, you need to make a series of selection manually, such as vehicle model, software version, test system and test function etc. For new users, you are suggested to use DEMO to get familiar with the diagnosis procedures of the vehicle.
LAUNCH Phoenix Pro User Manual Fig. 5-4 3. Tap “DEMO” to jump to the DEMO system selection screen. (Note: No Bluetooth connection is required for DEMO program.) Fig. 5-5 4. Tap “Engine”, the system will jump to the function menu.
LAUNCH Phoenix Pro User Manual Fig. 5-6 A. Read DTC This function displays the detailed information of DTC records retrieved from the vehicle’s control system. Tap “Read DTC” in function menu, the screen will display the diagnostic result. Fig. 5-7 On-screen Buttons: Exit: Tap it to exit the current diagnostic software. Search: Highlight a certain DTC item, and then tap it to search the definition of the selected DTC online.
LAUNCH Phoenix Pro User Manual Report: To save the current data in text format. All reports are saved under the tab “Diagnostic Report” in “My Report”. For details, please refer to Chapter 10. Freeze Frame: When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze frame data includes a snapshot of critical parameter values at the time the DTC is set. Help: Tap it to view the help information. B.
LAUNCH Phoenix Pro User Manual Select Page: Tap it to select all items of the current page. Unselect: Tap it to deselect all data stream items. Exit: Tap it to exit the current diagnostic software. Print: Tap it to print the current screen. To perform printing, you need to purchase a Wi-Fi printer manufactured by LAUNCH separately. Confirm: Tap it to confirm and jump to the next step. After selecting the desired items, tap “Confirm” to enter the data stream reading page. Fig.
LAUNCH Phoenix Pro User Manual Fig. 5-10 9 Value – this is the default mode which displays the parameters in texts and shows in list format. 9 Combine – this option is mostly used in graph merge status for data comparison. In this case, different items are marked in different colors. See Fig. 5-11. Fig. 5-11 Record: Tap to start recording diagnostic data for future playback and analysis. The saved file follows the naming rule: It begins with vehicle type, and then the record starting time and ends with .
LAUNCH Phoenix Pro User Manual on playback operations, please refer to Chapter 10. To stop reading the data stream, tap before the recording progress bar. Print: Tap to print the content of current screen. An additional Wi-Fi printer is required. Help: Tap to view the help information. If more than one page of data stream items is displayed, an icon similar to 1/4 appears. Swipe the screen from right to left to switch to the next page. D.
LAUNCH Phoenix Pro User Manual 3. Tap “Restore” to directly jump to the system selection screen. 4. Tap the desired system to enter and follow the instructions on the screen to proceed. 5.2 Special (Reset) Function In addition to amazing & powerful diagnostic function, X-431 PADIV also features various service functions.
LAUNCH Phoenix Pro User Manual After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms. 2. Reset must be performed in the following cases: a) The brake pad and brake pad wear sensor are replaced. b) The brake pad indicator lamp is on. c) The brake pad sensor circuit is short, which is recovered. d) The servo motor is replaced.
LAUNCH Phoenix Pro User Manual ABS Bleeding This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS). 1. When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. 2. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
LAUNCH Phoenix Pro User Manual 6 Software Update If you did not download the software in process of product registration or a pop-up message prompting you that some new software can be updated, you may use this option to download it or keep it synchronized with the latest version. Tap “Software Upgrade” on the function menu to enter the update center. Fig. 6-1 By default, all diagnostic software is selected. To deselect certain software, tap “Unselect”, and then check the box next to vehicle model.
LAUNCH Phoenix Pro User Manual 7 Remote Diagnosis This option aims to help repair shops or technicians launch instant messaging and remote diagnosis, making the repair job getting fixed faster. Tap “Remote Diagnosis” to enter, the screen appears blank by default. 7.1 Interface Layout Fig. 7-1 1 Exit button Tap it to navigate to the previous screen. 2 Search bar Directly input the username of the X-431 PADIV to start searching, and then tap the desired one to add it into your friend list.
LAUNCH Phoenix Pro User Manual y Workshop y Technician y Golo users Once the result matches the keyword, a screen similar to the following will appear: Fig. 7-2 Tap “Add”, a dialog box pops up: Fig. 7-3 Tap “CONFIRM” to send your request. Once the partner receives the request, a beep will sound. Tap the “Message” tab, the screen displays: Fig. 7-4 Tap “Agree” to confirm and his/her name will appear in the friend list.
LAUNCH Phoenix Pro User Manual 7.3 Start Instant Messaging Note: The I/M(Instant Messaging) function is open to all users who had Launch’s diagnostic tool equipped with this module. But for remote diagnosis, it only can be launched between two diagnostic tools that have the same product configurations. After adding your friend, tap the profile logo to enter a screen similar to the following: Fig.
LAUNCH Phoenix Pro User Manual and then tap “Send” to send it; tap choose to send files, pictures etc. to send the voice message; tap to 7.4 Launch Remote Diagnosis Note: Before performing this operation, please make sure the following no matter which side sends the remote request: y Turn on the vehicle power supply. y Throttle should be in a closed position. y The VCI module should be properly connected to the vehicle’s DLC and a successful communication is required.
LAUNCH Request control remote device Phoenix Pro User Manual Request to control the partner’s device remotely to help him diagnose the vehicle. Tap “Request control remote device” Wait for partner’s confirmation Start connecting after request confirmed Start Diagnosis Generate diagnostic report Cancel To cancel this operation.
LAUNCH Phoenix Pro User Manual 8 Community This function is defined as a professional technician platform for technicians to publish vehicle issues, share repair skills and technical exchange. 8.1 Diagnostic Card This option is used to view all diagnostic cards on this repair community. Fig. 8-1 The following operations can be done: Tap and input the vehicle model name to search for all available diagnostic cards related to this model. Tap Tap to view all comments or post your comment.
LAUNCH Phoenix Pro User Manual 8.2 My Diagnostic Card This option allows you to manage all diagnostic cards that you posted or replied on this repair community. 8.3 Publish Diagnostic Card This item lets you start a new vehicle issue post to seek for a solution or share repair skills/operations with other technicians. Fig. 8-2 Tap “Experience” or “Question” tab to open it. Input the subject in the Theme field and tap “>” to choose the desired vehicle brand.
LAUNCH Phoenix Pro User Manual 9 Settings This function allows users to manage personal information and VCI module. 9.1 Profile Use this item to view and configure personal information. 9.2 Connector Setting Use this item to view and configure personal information. 9.2.1 My connector This option is used to manage all your activated VCI modules. If several diagnostic VCI modules are activated on this tool, a list of VCI modules will be displayed on the screen.
LAUNCH Phoenix Pro User Manual 9.3.2 Print information This option lets you define your print information. It mainly includes Workshop, Address, Telephone, Fax and License Plate. After inputting, tap “Save”. 9.3.3 Launch wireless printer connection This option is designed to establish a wireless connection between X-431 PADIV and the Wi-Fi printer (sold separately) while performing printing operations. Follow the steps below to connect the printer. 1. Tap “Launch Wireless Printer Connection”; Fig. 9-1 A.
LAUNCH Phoenix Pro User Manual “Connect” to enter Step 2. Fig. 9-2 Step 2: Join the Wi-Fi printer into LAN: Tap “Scan” to select the desired local Wi-Fi network from the list, and type in the security password (If it is an open network, password is not required), and then tap “Confirm”. Fig. 9-3 4. Once the Wi-Fi network of the printer is connected and the printer is found, tap “Printing test” to test the printing.
LAUNCH Phoenix Pro User Manual Fig. 9-4 Now you can use the Wi-Fi printer to print! If the printer is not found, please reset the printer to default factory settings (refer to Step 2 for details) and check whether the current device and the printer are on the same LAN. B. If you have configured the Wi-Fi printer to the LAN: 2. Tap “Connect to Printer”: a). If the local network remains as it is, tap “Test Print” directly to test the printing. b).
LAUNCH Phoenix Pro User Manual 10 My Report This option is used to view the diagnostic report generated in process of vehicle diagnosis. Additionally, delete, share operations are also supported. Tap “My Report” on the function menu, there are total 3 options available. In case the DTC result is saved on Read Trouble Code page, the files will be listed under Diagnostic Report tab. Fig. 10-1 If user records the running parameters while reading data stream, it will be saved as .
LAUNCH Phoenix Pro User Manual Tap the desired one to enter, a screen similar to the following displays: Fig. 10-3 Select the desired data stream items and tap “Submit” to jump to the playback page: Fig. 10-4 On-screen Buttons: Graph – displays the parameters in waveform graphs. Value – this is the default mode which displays the parameters in texts and shows in list format. Combine – this option is mostly used in graph merge status for data comparison.
LAUNCH Phoenix Pro User Manual Frame Playback – .plays back the recorded data stream items frame by frame. Once it is in frame playback mode, this button changes into “Auto Playback”. Remote Diagnostic Report lists all diagnostic reports generated in process of remote diagnosis.
LAUNCH Phoenix Pro User Manual 10 Others 10.1 Email The function allows you to send and receive email. 10.1.1 Configure an email account Note: Before sending or receiving email, you have to set up an email account. In addition, this function required a stable network connection. 1. On the home screen, tap Email. 2. Choose the desired email account type. 3. Input email address and password, tap “Next”.
LAUNCH Phoenix Pro User Manual 1 Return to the previous page. 2 Advance to the recently visited page. 3 Refresh the current page. 4 Close the current page. 5 Create a new tab. 6 Input a web address. 7 Add the current page as bookmark. 8 Open search bar. 9 Open bookmark list. 10 View more options. 10.2.2 Download files Files, pictures, and applications can be downloaded from the website in browser.
LAUNCH Phoenix Pro User Manual 10.3.3 Install an application Do the following steps: 1. Tap Settings > Security, and set the “Unknown sources” to ON, which allows you to install apps from unknown sources. 2. A dialog box appears on the screen, tap “OK” to confirm. 3. Set the tool as “Connected as a media device”, and copy the APK file from the PC to the tool. 10.4 Clear Cache Doing so clears all browsing records and accounts and enables X-431 PADIV to run smoothly and quickly. 1. Tap Settings > Apps. 2.
LAUNCH Phoenix Pro User Manual 11 FAQ 1. How to save power? ¾ Please turn off the screen while X-431 PADIV keeps idle. ¾ Set a shorter standby time. ¾ Decrease the brightness of the screen. ¾ If WLAN connection is not required, please turn it off. ¾ Disable GPS function if GPS service is not in use. 2. What should I do in case I forgot the screen lock? You can set screen lock as pattern or password. If you forgot the password, please consult your device provider or reset your device.
LAUNCH Phoenix Pro User Manual 4. Tap “Clear all data” to start resetting until the tool automatically reboots. 6. Why some videos on the website can be not played? It possibly results from: 1. The current browser does not support Flash playing; 2. Flash player does not support this video. Try to use other browsers to watch it or install other Flash player. 7. The data and time of X-431 PADIV can not be set. It is because Automatic date & time is set on your X-431 PADIV.
Warranty THIS WARRANTY IS EXPRESSLY LIMITED TO PERSONS WHO PURCHASE LAUNCH PRODUCTS FOR PURPOSES OF RESALE OR USE IN THE ORDINARY COURSE OF THE BUYER’S BUSINESS. LAUNCH electronic product is warranted against defects in materials and workmanship for one year from date of delivery to the user. This warranty does not cover any part that has been abused, altered, used for a purpose other than for which it was intended, or used in a manner inconsistent with instructions regarding use.
North of Wuhe Avenue, Banxuegang, Bantian, Longgang, Shenzhen, Guangdong P.R.China, 518129 Launch website: http://www. cnlaunch.com http://www.x431.com Statement: LAUNCH reserves the rights to make any change to product designs and specifications without notice. The actual object may differ a little from the descriptions in the manual in physical appearance, color and configuration.
