Installation Guide

Content:
1) Body
2) Thread tube
3) Soft Washer
4) Hard Washer
5) Lock nut
6) Inlet supply line 2 pcs
7) Handle
Big Lock nut stlye:
1
Remove the soft washer (3), hard washer(4) and lock nut(5) from the faucet thread tube(2).
2
Screw and hand tighten the hot and cold flexible hoses(6) to the faucet. DO NOT use a wrench
to tighten hoses as this may damage the hose and/or the hose threads.
3
Install faucet through center hole of your basin or conter.
4
Re-install the soft washer(3) followed by the hard washer(4) and lock-nut(5).Hand tighten then
tighten further using a screw driver to tighten lock-nut screws.
5
Attach flexible hose to water supply.