Product Manual

Properties Window
MAGNET Tools ver 1.0
86
- RTK Auto Topo - the data collected during a kinematic
RTK measurement. (The rover antenna is in motion during
data collection. The name of the rover point is the name of a
current epoch. The name is created by field software
automatically.)
and check box:
Enabled
- if this check box is selected (default setting), the GPS
observation is included in adjustment, coordinate calculation and
export. If this parameter is unchecked, adjustment, coordinate
calculation and export will ignore the vector. A disabled GPS
observation is grayed-out in all views.
Observation Tab of the Properties
Window for a GPS Observation
You can open this tab if the Properties command from the pop-up
menu for the highlighted line in the GPS Obs tab
is selected.
This tab contains the GPS observation components:
• dX
- the GPS observation's dX component (in Cartesian
geocentric coordinate system), in current units.
• dY-
the GPS observation's dY component (in Cartesian
geocentric coordinate system), in current units.
• dZ -
the GPS observation's dZ component (in Cartesian
geocentric coordinate system), in current units.
• dN
- the GPS observation's dN component (in topocentric
coordinates), in current units.
• dE
- the GPS observation's dE component (in topocentric
coordinates), in current units.
• dH
- the GPS observation's dU component (in topocentric
coordinates), in current units.
• Azimuth
- the GPS observation's azimuth.
• Elevation
- the GPS observation's elevation.