Product Manual

Properties Window
MAGNET Tools ver 1.0
80
- Base - data collected on the base station.
- Topo - data collected during static RTK measurements.
(The rover antenna remains motionless during data collection
for the point. The name of the rover point is the name of a
ground point. This name is entered manually.)
- AutoTopo - data collected during kinematic RTK
measurements. (The rover antenna is movable during data
collection. The name of the rover point is the name of a
current epoch. This name is created by the field software
automatically.)
• Source
- the path of the raw data to the computer disk drive, local
area network, or storage media.
• Start Time
- the first epoch time of the RTK GPS occupation. The
column cannot be empty.
• Stop Time
- the end epoch time of the RTK GPS occupation. The
column cannot be empty.
• Duration
- the duration of time in which the observational data
was logged for the given GPS occupation (Duration = Stop Time
- Start Time).
and check box:
Enabled
- if this check box is selected (default setting), the GPS
occupation is included in adjustment, coordinate calculation and
export. If this parameter is unchecked, adjustment, coordinate
calculation and export will ignore the vector with the given
occupation. A disabled GPS occupation is gray in all views.
Occupation Tab of the Properties
Window for a GPS Occupation
You can open this tab if the Properties command from the pop-up
menu for the highlighted line in the GPS Occupations
tab was
selected.
This tab contains the fields: