Product Manual

Properties Window
MAGNET Tools ver 1.0
76
coordinates (XYZ) in the WGS-84 coordinate system, in the
these columns.
- If
Datum Lat, Lon, Ell.H is selected, the coordinates
columns have the corresponding names "Latitude
/Longitude/
Ell.Height
". You see latitude, longitude and ellipsoidal
heights in the current datum in these columns.
- If
Datum Lat, Lon, Elevation is selected, the
coordinates columns have the corresponding names
"Latitude
/Longitude/ Elevation". You see latitude, longitude
and orthometric heights (elevation) in the current datum in
the these columns.
- If
Ground | None or Ground | Localization is selected,
the coordinates columns have the corresponding names
"Ground Northing
/Ground Easting/Elevation". You see
northings, eastings, orthometric heights (elevation)
coordinates in the ground coordinates system in these
columns.
When a projection is defined for the job, the Status Bar
contains the Grid coordinate system in the list of coordinate
systems. If
Grid is selected, the coordinates columns have
the corresponding names "Grid Northing
/Grid Easting/
Elevation
". You see the point's northings, eastings,
orthometric heights (elevation) coordinates in the grid
coordinates in these columns.
• Geoid Separation
- some constant, which is the characteristic of
the current geoid model. It is calculated for the given point. To
get the orthometric height of the point, subtract the value of this
constant from the value of ellipsoidal height. This value is
displayed when the corresponding geoid is selected for this job.