Product Manual

Point Properties window

MAGNET Tools ver 1.0

• Layer

- the Layer where the point resides. The Layer sets the

plotting style for the point. Every point has a non-empty Layer. In

this field, you can select any Layer from the list of user-created

layers.

• Source

– the path of the raw data on the computer disk drive,

local area network or storage media.

and check box:

Enabled

- if this check box is selected (default setting for all point

types), the point and all objects related to the given point(s) is

included in adjustment, coordinate calculation and export. If this

parameter is unchecked, adjustment, coordinate calculation and

export will ignore the point(s) and all objects related to the given

point(s). A disabled point is grayed-out in all views.

Coordinates Tab of the Properties

Window for a Point

You can open this tab after selecting the

Properties command from

the pop-up menu for the highlighted line in the Point tab

. This tab

contains the fields:

• Point coordinates – the coordinates of the point. To edit the value,

click on the highlighted field and enter a new value. The

coordinate type depends on the selected coordinate system in the

Status Bar or Job Configuration window:

- If

WGS84 Lat, Lon, Ell.H is selected, the coordinates

columns have the corresponding names WGS84 Latitude

WGS84 Longitude

/WGS84 Ell.Height. You see latitudes,

longitudes and ellipsoidal heights in the WGS-84 coordinate

system, in these columns.

WGS84 X,Y,Z is selected, the coordinates columns have

the corresponding names X

/Y/Z. You see Cartesian