Product Manual

Properties Window

MAGNET Tools ver 1.0

General Tab of the Properties

Window for a Point

Displays the General tab of the point Properties window. You can

open this tab after selecting the

Properties command from the pop-

up menu for the highlighted line in the Point tab

. This tab contains the

fields:

• Name

- a point name. To edit the name, click on the highlighted

field and enter a new name. The point name is unique and the

field cannot be empty.

• Note

– any additional point's note. To edit the note, click on the

highlighted field and enter comments, if necessary.

• Control

– the status of the point's coordinates. You can select the

corresponding status from the drop-down list:

- None - all coordinates can be changed after adjustment or

coordinate calculation.

- Vertical - the elevation / ellipsoidal height is left

unchangeable after adjustment or coordinate calculation. The

symbol is set in the Icon

column for this status.

- Horizontal - the horizontal coordinates are left

unchangeable after adjustment or coordinate calculation.The

symbol is set in the Icon

column for this status.

- Both - the horizontal and vertical coordinates are left

unchangeable after adjustment or coordinate calculation.The

symbol is set in the Icon

column for this status.

• Code – the primary code used for the point. If a point has multiple

codes, all codes of the point will be displayed using a comma as a

separator "1,AA,BB". To edit a code, click on the highlighted

field and select a new one from the drop-down list of existing

codes, enter a new code(s), or set the Code to empty.