Product Manual

Lines Tab

MAGNET Tools ver 1.0

- AutoRejected - the DL observation is not adjusted because

the vector had the status Not Allowed before the adjustment

procedure.

- Disable - the DL observation is not adjusted, because the

vector was disabled before the adjustment procedure.

Right-click on a highlighted line to display a pop-up menu. This

menu contains a set of commands that can be divided into three

groups:

common commands for all tabs of the Tabular View

specific commands for the left panel of the DL Obs tab

specific commands for the right panel of the DL Obs tab

Lines Tab

The Lines tab is shown only if the job contains polyline data. The

Lines tab displays a table containing two panels. The left panel

displays all polylines (type, layers, plotting styles, codes and string)

in the job, and the right panel displays all segments for the selected

polyline.

The left panel can have the following informational columns:

• Icon

- a symbol associated with the line. For details, see a list of

symbols in the left panel of the Lines tab.

• Type

- In this field you can select the type of the polyline:

- Line - unclosed polyline

- Area - closed polyline

When you select Area for a polyline which has the Line type, the

application automatically adds a segment to close the existing

polyline (if the existing polyline has more than one segment).

When you select Line for a polyline which has the Area type, the

application automatically removes a segment to unclose the area.

• Layer

– the Layer in which the polyline resides. The Layer sets

the plotting style for the polyline (and all segments of the