Product Manual

Tabular View
MAGNET Tools ver 1.0
58
• Vert Offset
- the vertical offset from the horizontal plane for
traverse and sideshot points.You can edit the measurement.
• Distance
- the measured distance from DL to the given point. You
cannot edit the measurement.
• Instrument Elevation
- the elevation of sight that includes the
elevation of the BS point and the rod reading on the BS point.
You cannot edit the measurement.
• Std Dev
- standard deviation for the level measurement. This
value is created in the Digital Level. You cannot edit the
parameter.
• Note
- any additional DL observation's note. To edit the note,
click on the highlighted field and enter comments.
• Date
- the start date (day/month/year) and time of creating the
measurement. You cannot edit the value.
• Source
- the path of the raw data on the computer disk drive,
local area network, or storage media.
• Ht. Residual
– adjustment residuals for the level
measurements.You cannot edit the value.
• Elevation
- the elevation on the FS point that includes the
elevation of sight and rod reading on the FS point. You cannot
edit the value.
• AutoReject
- In this field you can select the status of the given DL
observation for Adjustment:
- Allowed - the DL observation will be used in Adjustment.
- Not Allowed - the DL observation will not be used in
Adjustment.
• Adjustment Status
- the status of the given DL observation after
Adjustment:
- Not Adjusted - the DL observation is not adjusted.
- Adjusted - the DL observation is adjusted.