Product Manual

DL Obs Tab
MAGNET Tools ver 1.0
57
• Level Run
- the name of the leveling job created in a digital level.
• Date
- the start date (day/month/year) and time of creating the
job. You cannot edit the value.
• Note
- any additional DL run's note. To edit the note, click on the
highlighted field and enter a comment.
• Distance
- the sum of all backsight and foresight distances. You
cannot edit the parameter.
• Balance
- the sum of differences between the DL to BS point and
the DL to FS point of the job. You cannot edit the parameter.
The right panel can have the following informational columns:
• Icon
- a symbol associated with the DL occupation. For details,
see a list of symbols in the left panel of the DL Obs tab
.
• #
- the number of the DL observation contained in the current job.
You cannot set any number from the list.
• Point
- the name of the turning or side shot point. You can select a
point from the list.
• Type
- the current type of the Digital Level observation. This
field contains the list of the DL observation types. You cannot
select a type from the list:
- SS - sideshot - the measurement to a sideshot point.
- BS - backsight - the measurement to the previous
occupation point in the DL run.
- FS - foresight - the measurement to the next occupation
point in the DL run.
- End of Changing Pt - the end measurement (of the given DL
run) to the point which is used to carry the measurements
forward in the DL run.
- End of Bench Mark - the end measurement (of the given DL
run) to the point with a known elevation.
• Ht. Measurements
- the rod reading on the given point in current
linear units. You cannot edit the measurement.