Product Manual

TS Obs Tab

MAGNET Tools ver 1.0

• Icon

- a symbol associated with the TS observation. For details,

see a list of symbols in the right panel of the TS Obs tab

• #

- the number of the TS observation contained in the raw file.

You cannot edit this parameter.

• Point From

- the name of the point where the Total Station is set.

You cannot edit this name.

• Date

- the date and time of the total station measurement. You

cannot edit this field.

• Code

- code of the TS observation. A TS observation can have

only one code. The code entered for a TS observation is

automatically displayed as code for the corresponding point in the

Point tab

. To edit the code, click on the highlighted field and

select a new one from the drop-down list of existing codes, enter

a new code(s), or remove the Code and leave the field empty.

• String

- the string for the TS observation. The string entered for a

TS observation is automatically displayed as string for the

corresponding point in the Point tab

. Using a complex of string

and codes allows you to automatically create a line in the job.

• Control Code

- the control code used for the TS observation. The

control code entered for a TS observation is automatically

displayed as control code for the corresponding point in the Point

tab.

• Control Code 2

- the control code used for the TS observation.

The Control Code 2 has the same functionality as Control Code.

• Source

- the path of the raw data on the computer disk drive, local

area network, or storage media.

• Point To

- the name of the point at which the reflector was set.

You can set any point's name from the list.

• Type

- the current type of the Total Station observation. This field

contains the list of the Total Station observation types. You can

select the other type for some types (not for all types). Click here

for more details.