Product Manual

Tabular View
MAGNET Tools ver 1.0
52
• #
- the number of a TS occupation contained in the raw file. You
can set any number from the list for a TS occupation.
• Point Name
- the name of the point where the Total Station was
set. You can set any point's name from the list.
• Instrument Height
- the vertical distance from the Instrument
Center Mark to the ground, in current linear units. To edit the
value, click on the highlighted field and enter a new value.
• Instrument Type
- the Instrument Type for the given TS
occupation. To change the instrument type, click and select
another instrument type from the drop-down list. Also you can
create a custom instrument type by clicking the Custom button.
See How to add a instrument type
for more details.
• Instrument Centering Error
- the error of centering the Total
Station position over the mark, in current linear units. This error
will be taken into account during adjustment of the network with
the given TS occupation. To edit the value, click on the
highlighted field and enter a new value.
• Instrument Height Error
- the measurement error of the Total
Station height over the mark, in current linear units. This error
will be taken into account during adjustment of the network with
the given TS occupation. To edit the value, click on the
highlighted field and enter a new value.
• Reflector Centering Error
- the error of centering the reflector
position over the mark, in current linear units. This error will be
taken into account during adjustment of the network with the
given TS occupation. To edit the value, click on the highlighted
field and enter a new value.
• Reflector Height Error
- the measurement error of the reflector
height over the mark in the current linear units. This error will be
taken into account during adjustment of the network with the
given TS occupation. To edit the value, click on the highlighted
field and enter a new value.
The right panel can have the following informational columns: