Product Manual

Tabular View
MAGNET Tools ver 1.0
44
• Interval
- the occupation logging interval in milliseconds.
• GPS week, day
- GPS week and day of occupation start time (the
time from January, 6 1980: the day of the GPS launch).
• Receiver
- the receiver's serial number.
• Receiver Vendor
- the name of the vendor which developed this
GPS receiver. You can select a desired company from the list.
This selects a vendor of the receiver to accommodate differences
in post - processing GLONASS measurements by different
companies.
• H RMS
- the horizontal precision estimate of the RTK GPS
occupation in the current linear units.
• V RMS
- the vertical precision estimate of the RTK GPS
occupation in the current linear units.
• Azimuth
- the horizontal angle to the offset point in current linear
units.
• Offset Dist
- the distance from the Start Point to the offset point in
current linear units.
• Offset Ht
- the height difference between the ground point and the
offset point in current linear units.
• Offset Across
- this field is not used for Azimuth & Offsets data.
Note 1: The parameters marked in magenta have non-zero values
when the imported MAGNET Field job contains Azimuth & Offsets
data and the offset was performed from the measured point (See the
picture of the Azimuth & Offsets).
Right-click on a highlighted line to display a pop-up menu. This
menu contains a set of commands. They can be divided into two
groups:
common commands for all tabs
of the Tabular View
specific commands for the GPS Occupations tab