Product Manual

GPS Occupations tab
MAGNET Tools ver 1.0
43
• Antenna Centering Error
- the centering error of Antenna
Reference Point (ARP) position over the mark in the horizontal
plane. This error will be taken into account when estimating
adjustment results. To edit the value, click on the highlighted
column and enter a new value.
• Antenna Height Error
- the measurement error of the antenna
height over the mark. This error will be taken into account when
estimating adjustment results. To edit the value, click on the
highlighted column and enter a new value.
• Start Time
- the first epoch time of the RTK GPS occupation. The
column cannot be empty.
• Stop Time
- the end epoch time of the RTK GPS occupation. The
column cannot be empty.
• Duration
- the duration of time in which the observational data
was logged for the given GPS occupation (Duration = Stop Time
- Start Time).
• Method
- the surveying method for the given occupation. Three
methods are presented for the RTK occupation:
- Base - data collected on the base station.
- Topo - data collected during static RTK measurements (The
rover antenna remains motionless during data collection for
the point. The name of the rover point is the name of a ground
point. The name is entered by the user.)
- AutoTopo - data collected during kinematic RTK
measurements (The rover antenna is movable during the
collection of data. The name of rover point is the name of a
current epoch. The name is automatically created by the field
software.)
• Note
- any additional notes for the selected GPS occupation. To
edit the value, click on the highlighted field and enter your
comments.
• Source
- the path of the raw data on the computer disk drive, local
area network, or storage media.
• NEpoch
- the number of epochs for the given occupation.