Product Manual

Tabular View
MAGNET Tools ver 1.0
42
GPS Occupations tab
The GPS Occupations tab is shown only when the job contains GPS
data. The tab displays the following GPS observation information:
• Icon
- a symbol associated with the occupation. For details, see a
list of symbols in the GPS Occupations tab.
• Point Name
- the name of the occupied point. For RTK
occupation, this column cannot be empty. To edit the name, click
on the highlighted column and enter a new value.
• Original Name
- the initial name of the occupation as indicated in
the source file. The column cannot be empty. To edit the name,
click on the highlighted column and enter a new value.
• Antenna Type
- the model of the GPS antenna used for the
occupation. To change the antenna type, click and select another
antenna type from the drop-down list. Also you can create a
custom antenna by clicking the Custom button. See How to add a
custom antenna for more details. NOTE: If the None antenna
type is selected, the software will use zero values for A1/A2
parameters and in this case, the antenna phase center for L1 and
L2 frequencies coincides with the Antenna Reference Point.
• Antenna Height
- the GPS antenna's height for the occupation, in
the current units. To edit the value, click on the highlighted
column and enter a new value.
• Antenna Height Method
- the method used to measure the
antenna height. You can change the type (slant or vertical) using
the drop-down list.
Vertical – measuring from the ground point to the antenna
reference point (ARP) located on the bottom of the receiver.
Slant – measuring from the ground point to the antenna slant
height measure mark (SHMM).