Product Manual

Tabular View
MAGNET Tools ver 1.0
40
comma as a separator "1,AA,BB". To edit the code, click on the
highlighted field and select a new one from the drop-down list of
existing codes, enter a new code(s), or set the Code to empty.
• Control
– the status of the point's coordinates. You can select the
corresponding status from the drop-down list:
- None - all coordinates can be changed after adjustment or
coordinate calculation.
- Vertical - the elevation / ellipsoidal height is left
unchangeable after adjustment or coordinate calculation. The
symbol is set in the Icon
column for this status.
- Horizontal - the horizontal coordinates are left
unchangeable after adjustment or coordinate calculation. The
symbol is set in the Icon
column for this status.
- Both - the horizontal and vertical coordinates are left
unchangeable after adjustment or coordinate calculation. The
symbol is set in the Icon
column for this status.
• Note
– any additional point's note. To edit the note, click on the
highlighted field and enter a comment.
• Photo Notes
– the number of a photo notes per point. In this
column the number is read-only and sortable. You can add/
remove/see a picture for the given point in the Photo Notes tab
of
the Properties window.
• Layer
- the Layer in which the point resides. The Layer sets the
plotting style for the point. Every point has a non-empty Layer. In
this field, you can select any Layer from the list of user-created
layers.
• Source
– the path of the raw data on the computer disk drive,
local area network, or storage media.
• Standard Deviations – the standard deviations for the point after
adjustment. Std Dev n
, Std Dev e, Std Dev Hz, Std Dev u display
in Grid (N/E/U) coordinate system.
• String
- displays a value. A complex of strings and codes allows
you to create a line in the job automatically.