Product Manual

Quality Control Item of the Job Configuration Window
MAGNET Tools ver 1.0
35
the GPS observation will be highlighted in red in the GPS Obs
tab, Observation View and Report.
• Point Standard Deviations
- if this parameter is checked, during
adjustment the application will compare a point precision with
the values that are set in the Static Horizontal Precision
and Static
Vertical Precision fields correspondingly. If the horizontal or
vertical precision for a point after adjustment is worse than the
value in the settings, the point will be highlighted in red in the
Points tab, Observation View and Reports.
• Identical Points
- if this parameter is checked, the application will
compare the distance between two points with the Static
Horizontal Precision and Static Vertical Precision fields
correspondingly. If the distance is less than the value, both points
will be highlighted in red in the Points tab, Observation View and
Report.
• Misnamed GPS Occupations
- if this parameter is checked, the
application will compare the coordinates of the GPS static
occupation with the coordinates of the corresponding point (for
this occupation). If the difference is more than 30 meters, the
point and GPS occupation are highlighted in red on the tables,
Observation View and Report.
• Misnamed Autotopo Rovers
- if this parameter is checked, the
application will compare the coordinates of the GPS kinematic
occupation with the coordinates of the corresponding point (for
this occupation). If the difference is more than 30 meters, the
point and GPS occupation are highlighted in red on the tables,
Observation View and Report.
• Invalid Antenna Parameters
- if this parameter is checked, the
application will search for an empty Antenna Type field
or/and
Antenna Height field
or/and Antenna Height Method field for the
all GPS occupations of the job. If one of the fields is empty, the
occupation is highlighted in red on the GPS Occupations tab and
Report.
• DL Test
- if this parameter is checked, the application will
compare the precision for digital level measurements with the
values that are set in the DL Observation Precisions tab
. If the