Product Manual

Job Configuration Window

MAGNET Tools ver 1.0

Automatic Test Tab of Quality Control

Item

In the tab you can set which quality control test will automatically run

and will mark points and/or observations that fail the Quality Control

test in red. Clearing any of these check boxes will also clear red

marks and descriptions on the Quality Control tabs of the Property

dialog boxes. The following tests are available:

• Warn Float solutions

- if this parameter is checked, the

GPS observations, which have the Float solution, are highlighted

in red in the GPS Observation tab, Observation View and

Reports.

• RTK Precisions

- if this parameter is checked, the application

will compare the current precision of the RTK GPS Observation

with the values that are set in the RTK Horizontal Precision

and

RTK Vertical Precision

fields correspondingly. If the horizontal

or vertical precision for an RTK vector is worse than the value in

the settings, both RTK Topo and RTK Auto Topo

GPS observation will be highlighted in red in the GPS Obs tab,

Observation View and Report.

• PP Static Precisions

- if this parameter is checked, the application

will compare the current precision of the static GPS Observation

with the values that are set in the PP Static Horizontal Precision

and PP Static Vertical Precision

fields correspondingly. If the

horizontal or vertical precision for a static GPS observation is

worse than the value in the settings, the GPS observation will be

highlighted in red in the GPS Obs tab, Observation View and

Report.

• PP Kinematic Precision

- if this parameter is checked, the

application will compare the current precision of the kinematic

GPS Observation with the values that are set in the PP Kinematic

Horizontal Precision and PP Kinematic Vertical Precision fields

correspondingly. If the horizontal or vertical precision for a

kinematic GPS observation is worse than the value in the settings,