Product Manual

Job Configuration Window
MAGNET Tools ver 1.0
32
tab after clicking the Compute Coordinates or the Adjustment
icons.
• Section / Loop Balance Tolerance
- the current threshold value of
the balance of the section / loop. If a balance of the section / loop
is greater than the Section/Loop Balance Tolerance values and if
you check the DL Test
check box in the Automatic Test tab, the
DL run (DL occupation) will be highlighted in red in the DL Obs
tab after clicking the Compute Coordinates or the Adjustment
icons.
• Section misclosure factor
- the current value of the factor in
meters, which is used in the calculation of the Section
Misclosure Tolerance:
If a section misclosure has the precision worse than the Section
Misclosure Tolerance value and if you check the DL Test
check
box in the Automatic Test tab
, the DL run (DL occupation) will
be highlighted in red in the DL Obs tab after clicking the
Compute Coordinates or the Adjustment icons.
• Loop or line misclosure factor
- the current value of the factor in
meters, which is used in the calculation of the Loop Misclosure
Tolerance:
If a loop misclosure has a precision worse than the Loop
Misclosure Tolerance value and if you check the DL Test
check
box in the Automatic Test tab
, the DL run (DL occupation) will
be highlighted in red in the DL Obs tab after clicking the
Compute Coordinates or the Adjustment icons.