Product Manual

Job Configuration Window
MAGNET Tools ver 1.0
30
TS Observation Precisions Tab of
Quality Control Item
In the tab you can set the threshold value of precision for a slope
distance and horizontal/vertical angle of Total Station observations.
The tabs contains the following editable fields with the values in the
current linear units:
• TS Distance Precision
- the current threshold value of the slope
distance precision for the Total Station observations. If the slope
distance residuals for a Total Station observation after adjusting
the network is worse than the value in the settings, the TS
observation will be highlighted in red in the TS Obs tab,
Observation View and Report. When "Allowed" is set in the
AutoReject field
, the TS observation will be automatically
rejected from the adjustment process.
• TS Vertical Angle Precision
- the current threshold value of the
vertical angle precision for the Total Station observations. If the
vertical angle residuals for a Total Station observation after
adjusting the network is worse than the value in the settings, the
TS observation will be highlighted in red in the TS Obs tab,
Observation View and Report. When "Allowed" is set in the
AutoReject field
, the TS observation will be automatically
rejected from the adjustment process.
• TS Horizontal Angle Precision
- the current threshold value of the
horizontal angle precision for the Total Station observations. If
the horizontal angle residuals for a Total Station observation after
adjusting the network is worse than the value in the settings, the
TS observation will be highlighted in red in the TS Obs tab,
Observation View and Report. When "Allowed" is set in the
AutoReject field
, the TS observation will be automatically
rejected from the adjustment process.