Product Manual

Quality Control Item of the Job Configuration Window
MAGNET Tools ver 1.0
27
highlighted in red in the Points tab, Observation View and
Reports.
- When you check the "PP Static Precisions
" test in the
Automatic Test tab
, the application will highlight only worse
point(s) after processing the network.
-When you check the "Point Standard Deviations
" test in the
Automatic Test tab
and check "By Quality Control" in the
Rejection Criterion
, the application will highlight only worse
point(s) after adjusting the network and worse Topo point(s)
of the RTK survey.
• Kinematic Horizontal Precision
- the current threshold value of
the horizontal precision for the processed or adjusted or RTK
coordinates of the kinematic points. If the horizontal precision for
a point is worse than the value in the settings, the point will be
highlighted in red in the Points tab, Observation View and
Reports.
- When you check the "PP Kinematic Precisions
" test in the
Automatic Test tab
, the application will highlight only worse
point(s) after processing the network.
- When you check the "Point Standard Deviations
" test in the
Automatic Test tab
and check "By Quality Control" in the
Rejection Criterion
, the application will highlight only worse
point(s) after adjusting the network and worse AutoTopo
point(s) of the RTK survey.
• Kinematic Vertical Precision
- the current threshold value of the
vertical precision for the processed or adjusted or RTK
coordinates of the kinematic points. If the vertical precision for a
point is worse than the value in the settings, the point will be
highlighted in red in the Points tab, Observation View and
Reports.
- When you check the "PP Kinematic Precisions
" test in the
Automatic Test tab
, the application will highlight only worse
point(s) after processing the network.
- When you check the "Point Standard Deviations
" test in the
Automatic Test tab
and check "By Quality Control" in the