Product Manual

Job Configuration Window

MAGNET Tools ver 1.0

In the Equipment item you can select the default type of GPS antenna

calibrations. The initial set is 'Default absolute'. Also you can import

any other antenna calibration from a file to the job.

Note 1: The NGS and TPS calibration contains the absolute and

relative calibrations:

Relative – the antenna offsets and phase center variations are

computed with respect to the AOAD/M_T antenna.

Absolute – the recalculated relative calibration that takes into

account the absolute values for AOAD/M_T antenna.

Note 2: The custom antenna contains only the absolute calibration.

Note 3: You can change the default type of GPS antenna calibration

for any GPS antenna in the Antenna Type field

of the Antenna tab for

the occupation properties.

Save Item of the Job

Configuration Window

In the Save item you can set the interval for automatic saving

(AutoSave) opened job. The AutoSave feature is useful in case a job

crashes. Any data of this job (that you did not save) will be lost. But if

you turn on the AutoSave feature, then after crashing the job, the

application will offer to open the saved job.