Product Manual

Units Item of the Job Configuration Window

MAGNET Tools ver 1.0

Conversion Tab of the Coordinate

Systems Item

In the tab you can select the way of transformation between NAD27

and NAD83_NO_TRANS datums. The Convert to/from NAD27

using field contains the list with two ways:

• NAD27 Datum - the application will apply parameters NAD27

from the its own database for transformation between NAD27

and NAD83_NO_TRANS datums,

• NADCON - the application will apply the Federal standard

(NADCON program) for NAD 27 to NAD83_NO_TRANS

datum transformations.

Units Item of the Job

Configuration Window

In the Units item you can set linear and angular units of measurement

as current units for the job. You can set the corresponding units in the

Linear Unit

and Angular Unit fields.

Equipment Item of the Job

Configuration Window