Product Manual

Job Configuration Window
MAGNET Tools ver 1.0
12
• Lat,Lon (dec. degrees)
- in this field you can set the number of
digits after the decimal for the latitude and longitude format in
decimal degrees (dd.ddd). The default is 8.
• Area
- in this field you can set the number of digits displayed
after the decimal for all area data. The default is 0.
• Volumes
- in this field you can set the number of digits displayed
after the decimal for all volume data. The default is 1.
• Time (seconds)
- in this field you can set the number of digits
displayed after the decimal for time. The default is 0.
Time Tab of the Display Item
In the Time tab you can select a desired time zone in the GPS Time
Zone Offset field to calculate and display the local time instead of the
GPS time. Also you can have the clock adjusted automatically for
daylight savings.
Road Tab of the Display Item
The Road tab sets the type of distance view to use for the center line
position.
In the Display CL Pos as
field you can select Chainage or Station:
• When you select the “Station” type, the number of the station is a
value equal to the ratio of distance from the start point of the road
and the interval for the station. This number consists of two parts:
The first part is an integer of