Product Manual

Inverse Window
MAGNET Tools ver 1.0
185
Inverse Window
The window is activated by clicking the Inverse icon from the Report
tab of the MAGNET Tools ribbon.
The Inverse function
computes the distance and the azimuth between
points of the job.
Before calculating, select the corresponding point(s) in the From
/ To
fields.
There are three ways to specify a point in the field:
• Enter the point name or enter point coordinates using format
{123.456,322.778} for the Grid and/or Ground coordinate system
and {11 12 14.555N, 07 08 09.444E} for the Datum coordinate
system:
• Selecting the point from a list which will appear after entering the
first common letter or digit of the point name:
• Drag-and-drop the selected point(s) or/and segment of line or/and
alignment of the road in the Tabular and/or Observation View /
Map View.
You can specify both a single point and multiple points in the field.
The selection of multiple points can apply with different delimiters.
If you specify multiple points, the software will calculate the inverse
task for all point combinations.
To start calculating the distance and azimuth between selected points,
click the Calculate button
.
To close the dialog box, click in the corner of the dialog box.
The Inverse tab
displays the results of the calculating inverse task for
the corresponding pair points.
• using a comma as the delimiter: From A,A2,A3,A4
• using a semicolon as the delimiter: From A;A2;A3;A4
• using a range of point names: From A-A4