Product Manual

Insert Point(s) to Line
MAGNET Tools ver 1.0
181
Insert Point(s) to Line
This command is available when the job contains a line. To activate
this function, select Insert Point(s) to Line command in the pop-up
menu for the left/right panel of the Lines tab
.
The function inserts point(s) to the line segment. When inserting a
point to a segment, the software deletes the selected segment between
the start point and end point, and creates two new segments: from the
start point to the existing /or a new point and from the existing /or a
new point to the end point).
Two options are available for inserting point(s) to the line:
• Highlight the Line, then highlight the Point:
- Highlight the desired line in Map View.
- Activate the function. The pointer will change ( ) ‘insert
point’ mode has become active.
- Select the desired segment type for the line from the list of
the
Segment type field on the Insert Point(s) to Line
window:
- Click a existing point or click at the desired place (for
creating a new point) on the Map View to insert it to the line.