Product Manual

Job Configuration Window
MAGNET Tools ver 1.0
10
• GPS+ configuration - for processing and adjusting GNSS raw
data with centimeter accuracy. The threshold value of RTK
horizontal precision is 0.02 meters and RTK vertical precision is
0.05 meters.
• DGPS configuration - for processing and adjusting GNSS raw
data with meter accuracy. The threshold value of RTK horizontal
precision is 1 meter and RTK vertical precision is 3 meters.
• Design configuration - for viewing and editing road data.
• Imaging configuration - for processing Total Station raw data
with image data. The threshold value of precision for a distance is
0.03 meters and 0°00'10.0000" for vertical/horizontal angles.
In this window you can:
- delete any configuration from the list (by clicking the Delete
button).
- rename the selected configuration (by clicking the Rename
button).
- apply the selected configuration to the current job (by clicking
Load
button).
- close the window (by clicking the Close button or ).
You can save any settings defined in any items in your configuration
and then use this configuration in your next job(s). After making
changes in the tabs of the Job configuration window, click the Save
configuration button. Enter a name in the Configuration name field
and click Ok in the Enter Configuration name window. The
configuration name will be saved in the list of the job configurations.
Display Item of the Job
Configuration Window