Product Manual

How To
MAGNET Tools ver 1.0
178
- select the desired projection (USA/SPC83/Ohia(North)) in
the Projection field
- select the desired datum (NAD83) in the Datum field
- select the Control type for the given point in the Point type
field
6. Click the Open button to start importing the file to the job and
close the Import window.
7. The Points tab will display the points coordinates for the
following settings in the Status Bar:
Append Point(s) to Line
To activate this function, select Append(s) Point to Line command
in the pop-up menu for the left/right panel of the Lines tab
.
The function adds point(s) to the line segment. Two options are
available for appending point(s) to the line:
• Highlight the Line, then highlight the Point:
- Highlight the desired line in Map View.
- Activate the function. The pointer will change ( )
after "append points" mode has become active.