Product Manual

Editing and Viewing MAGNET Field Offsets in the Job
MAGNET Tools ver 1.0
167
distance and angle measurements of the line’s points and distance
measurements (from this line) to the offset point.
After importing the MAGNET Field job with Lines and Offset
data into the current MAGNET Tools job, the right panel of the
TS Obs tab displays all measurements performed for calculating
the offset point. In this case MAGNET Tools applies the same
Point to the name for Line type measurement, and displays the
additional distance offsets measurements for the last Line
measurement:
You can edit the offset values in the TS Obs tab
and the Offset tab
for the given TS occupation. To obtain the coordinates of the
offset point, click the Compute Coordinates button.
• Plane and Corner: Determination of the horizontal and vertical
(3D) coordinates of an inaccessible point, as intersection of a line
Point
From
Point To Horizontal
Circle
Slope Dis-
tance(m)
Zenith Angle Type Offset
Along (m)
Off-
set
dHt
(m)
Offset
Across (m)
A Offset_Point 78 00
00.000
110.00 91 00 00.000 Line
A Offset_Point 59 00
00.000
78.00 92 00 00.000 Line 2.34 1.11 -3.45