Product Manual

How To
MAGNET Tools ver 1.0
164
• Hidden Point: Determination of the horizontal and vertical (3D)
coordinates of an inaccessible point using distance and angle
measurements to two prisms located on the rod.
After importing the MAGNET Field job with Hidden Point data
into the current MAGNET Tools job, the right panel of the TS
Obs tab displays all measurements performed for calculating this
offset point. In this case MAGNET Tools job applies the same
Point to name for Missing Pt
type measurements:
You cannot edit the offset values in the MAGNET Tools job.
• Two Lines Intersection: Determination of the horizontal and
vertical (3D) coordinates of an inaccessible point as the
intersection of two auxiliary lines.You create these lines (by two
points) and performs distance and angle measurements of the
line’s points.
Point
From
Point To Horizontal Cir-
cle
Slope Dis-
tance
Zenith Angle Type
A Offset_Point 45 00 00.000 100.00 90 00 00.000 Missing Pt.
A Offset_Point 45 10 15.000 101.00 91 00 00.000 Missing Pt.