Product Manual

How To
MAGNET Tools ver 1.0
162
the same Point to the name for
Side and Center type
measurements:
You cannot edit the offset values in the MAGNET Tools job.
• Horizontal/Vertical Angle Offset: Determination of the
horizontal and vertical (3D) coordinates of an inaccessible point
using distance and angle measurements.
After importing the MAGNET Field job with Horizontal/
Vertical Angle Offset data into the current MAGNET Tools job,
the right panel of the TS Obs tab displays two measurements
performed for calculating this offset point. In this case MAGNET
Tools job applies the
same Point to name for Vertical and Horz.
Vertical type measurements:
You cannot edit the offset values in the MAGNET Tools job.
Point
From
Point To Horizontal Circle Slope Dis-
tance
Type
A Offset_Point 35 12 33 150.55 Side
A Offset_Point 35 10 11 Center
Point
From
Point To Horizontal Cir-
cle
Slope Dis-
tance
Zenith Angle Type
A Offset_Point 45 12 34.000 100 91 12 16.000 Vertical
A Offset_Point 46 10 15.000 84 15 12.000 Horz.Vertical