Product Manual

Editing and Viewing MAGNET Field Offsets in the Job

MAGNET Tools ver 1.0

161

occupation and the linear and angular offsets) has the

icon.

- Offset tab in the Properties window for the point, if the

offset was performed from an existing point. The offset point

(calculated from the existed point and the linear and angular

offsets) has the icon.

You can edit the offset values in this tab. To obtain the

coordinates of the offset point, save the entered values by

clicking the OK button and then click the Compute Coordinates

button.

When you performs a survey with Total Station, MAGNET Field

allows the following offset types:

• Horizontal Angle Offset: Determination of the horizontal

(2D) coordinates of an inaccessible center of pipe / tree / pillar

using distance and angle measurements

After importing the MAGNET Field job with Horizontal Angle

Offset data into the current MAGNET Tools job, the right panel

of the TS Obs tab displays two measurements performed for

calculating this offset point. In this case MAGNET Tools applies