Product Manual

Enterprise Option: Inboxes Structure
MAGNET Tools ver 1.0
155
Click the icon, to open the Real Time sessions window. In the
Project field select the desired project. If you select the Project with
which the connection was established in the Connect to Project
window the Connect button is disabled. If you select a Project for
which you did not set a connection, click the Connect button to
establish the connection with the project. After connecting with the
project, the Connect button is disabled.
If a user from the MAGNET Field side has a connection with the
project, the Sessions table displays the user name, device name and
ID of the device connected to the MAGNET Enterprise. Each line in
the Sessions table displayed the connected device to the project.
To update information in the Sessions table, click the Refresh button.
Select a session and click the Start button. Clicking the Start button
starts uploading data to the MAGNET Enterprise from the receiver /
controller, where MAGNET Field runs. To finish the session, click
the Stop button.
After sending the measured /added points to the current job, the
Points tab will display the points in WGS-84 or Ground coordinate
systems.
Enterprise Option: Inboxes
Structure
The Enterprise service allows you to store data in inboxes which have
the following structure:
• Major inbox is Company. Each company has a Company Inbox.
The company Administrator will create a MAGNET Enterprise
company account. The Administrator will then add users to this
company account. All users that are added will have access to the
Company Inbox. The Administrator can set the different role for
the added users.