Product Manual

Properties Window
MAGNET Tools ver 1.0
142
Inverse Tab Properties Window
The Properties window for the inverse task contains the General tab.
Properties Window: General Tab for
Inverse
You can open the General tab, if the Properties command from the
pop-up menu for the highlighted line in the Inverse tab
is selected.
This tab contains the following fields:
• From
/ To – the point's name (if the point has name) selected in
the corresponding fields of the Inverse window
.
• Forward Azimuth
– the calculated value depends on the selected
coordinate system. If the global coordinate system (WGS84 Lat,
Lon, Ell.H/Datum Lat, Lon, Ell.H/Datum Lat, Lon,
Elevation) is selected in the Status bar, the horizontal geodesic
azimuth from the "From" point to the "To" point is displayed. For
a Ground/Grid coordinate system, selected in the Status Bar, the
grid/ground azimuth (bearing) from the "From" point to the "To"
point is displayed.
• Backward Azimuth
– the calculated value depends on the
selected coordinate system. If the global coordinate system
(WGS84 Lat, Lon, Ell.H/Datum Lat, Lon, Ell.H/Datum Lat,
Lon, Elevation) is selected in the Status bar, the horizontal
geodesic azimuth from the "To" point to the "From" point is
displayed. For a Ground/Grid coordinate system, selected in the
Status Bar, the grid/ground azimuth (bearing) from the "To" point
to the "From" point is displayed.
• Geodetic Distance
– the length of the geodetic line (the shortest
distance) between the two points on an ellipsoid.
• Ground Distance
– the calculated value depends on whether the
Grid-to-Ground transformation is activated or not. If Grid to
Ground transformation is not activated, it will be the geodetic