Product Manual

Properties Window
MAGNET Tools ver 1.0
140
X-Sections Template
Properties Window
The X-Sections Template tab displays a table containing two panels.
Each panel has its own Properties window.
The Properties window for the template contains the General tab.
The Properties window for the selected offset of the template contains
the General tab.
General Tab of the Properties: X-
Section Template / Add X-Section
Template Window
You can open this tab after selecting the Properties command from
the pop-up menu for the highlighted line in the left panel of the X-
Section Template tab. This tab contains data for the X-Section
Template in the fields:
• Name
- the name of the X-Section template. You can edit the
name.
• Cut Slope (1:n)
- represents the horizontal increment of the slope
for a unit of vertical increment. The cut slope is used when the
road surface is below the terrain. By default, the cut slope equals
0 (unit in percent). You can edit the parameter.
• Fill Slope (1:n)
- represents the horizontal increment of the slope
for a unit of vertical increment. The fill slope is used when the
road surface is above the terrain. By default, the fill slope equals
0 (unit in percent). You can edit the parameter.