Product Manual

Properties Window
MAGNET Tools ver 1.0
138
For any alignment type the Add Next Element
check box is present in
the Add Vert Element window. If this parameter is checked (default
setting for all alignment types), after clicking Ok in the current Add
Vert Element window, the next Add Vert Element window
automatically displays.
X-Section Station Properties
Windows
The Properties window for the X-Section station contains the General
tab.
General Tab of the Properties X-
Section Station /Add X-Section
Windows
You can open the Properties X-section Station window after selecting
the Properties
command from the pop-up menu in the X-Section tab.
You can open the Add X-Section window after selecting the Add X-
Section command from the pop-up menu for either the road or the X-
section. This tab contains the fields:
• Station/Chainage
- the station or chainage where the template is
to be applied. If you set "0", the selected template is applied from
the road start point to the road end point or to the point where a
new template is applied.
• Side
- the left or right side of the road relative to the center line
where this template is to be used.
• Template
- the name of the template from the list of existing
templates in the current job.