Product Manual

Vertical Element Properties Windows
MAGNET Tools ver 1.0
137
alignment. When creating a complex curve, the heights for long
sections 1, 2, and 3 and the length set for long section 2 will be used.
For Parabola Long Section the tab contains the fields:
• Sta/Chainage
- the number of the start station or chainage for a
long section element. You can edit this parameter for the long
section.
• Length
- the length of the vertical element. For the long section
element, set 0 for the start and end elements of the long section.
• Elevation
– the elevation on the station used for creating the long
section. You can edit this parameter for the long section.
For Arc Long Section the tab contains the fields:
• Sta/Chainage
- the number of the start station or chainage for a
long section element. You can edit this parameter for the long
section.
• Radius
- the radius of the vertical element. For the arc long
section element, set 0 for the start and end element of the long
section.
• Elevation
– the elevation on the station used for creating the long
section. You can edit this parameter for the long section.