Product Manual

Properties Window
MAGNET Tools ver 1.0
134
setting for all alignment types), after clicking Ok in the current Add
Horz Element window, the next Add Horz Element window
automatically displays.
End Position Tab of the Properties:
Horz Element / Add Horz Element
Windows
You can open the Properties: Horz Element window after selecting
the Properties command from the pop-up menu for the horizontal
alignment and open the Add Horz Element window after selecting the
Add Horz Element command from the pop-up menu for either the
road or the horizontal alignment. This tab contains the coordinates of
the end point of the horizontal alignment in the current linear units.
You cannot edit these values:
• End Sta/Chainage
- the number of the end station/ chainage for
the horizontal element.
• End Northing
- the end point northing coordinate in Ground /
Grid coordinate system.
• End Easting
– the end point easting coordinate in Ground / Grid
coordinate system.
• End Azimuth
– the azimuth of the tangent to the given point for
the horizontal alignment.