Product Manual

Properties Window
MAGNET Tools ver 1.0
132
of curve (DCV) parameter, the radius of the curve is
automatically calculated.
• Start Deg Chord
- the angle in degrees used to compute the start
radius of a curve whose chord is 100 units long. Using the degree
of chord (DCH) parameter, the radius of the curve is
automatically calculated.
• End Deg Curve
- the angle in degrees used to compute the end
radius of a curve whose curve is 100 units long. Using the degree
of a curve (DCV) parameter, the radius of the curve is
automatically calculated.
• End Deg Chord
- the angle in degrees used to compute the end
radius of a curve whose chord is 100 units long. Using the degree
of a chord (DCH) parameter, the radius of the curve is
automatically calculated.
For
Intersection the tab contains the fields:
• Intersection point
- the name of the intersection point or the end
point of the compound curve. You can select the desired point
from the list. After selecting the point, the Northing
and the
Easting
fields displays the coordinates of the selected point.
These coordinates cannot be changed for the selected point.
• Northing
- the intersection point's or compound curve end point's
northing coordinate in the current coordinate system. You can
edit the value when a point is not selected in the Intersection point
field.
• Easting
- the intersection point's or compound curve end point's
easting coordinate in the current coordinate system. You can edit
the value when a point is not selected in the Intersection point
field.