Product Manual

Properties Window
MAGNET Tools ver 1.0
126
Horizontal Element Properties
Window
The Properties window for the horizontal element contains the
following tabs:
• General tab
• End Position tab
General Tab of the Properties: Horz
Element / Add Horz Element Windows
You can open the Properties: Horz Element window after selecting
the
Properties command from the pop-up menu for the horizontal
alignment. You can also open the Add Horz Element window after
selecting the
Add Horz Element command from the pop-up menu
for either the road or the horizontal alignment.
The content of this tab depends on the alignment type
:
For the
Line the tab contains the fields:
• Length
- the length of the horizontal element.You can edit this
value.
• Azimuth
- the azimuth of the tangent to the start point of the
horizontal alignment. You can edit this value only for the starting
element of the road (in this case “Tangential to previous element”
box is disabled). To change the azimuth of all other elements,
uncheck the “Tangential to previous element” box and enter the
desired value in the field.
and check box:
• Tangential to previous element
- if this parameter is checked
(default setting for all horizontal alignment types except the first
road element), the given value of the azimuth will be used for the