Product Manual

Properties Window
MAGNET Tools ver 1.0
124
• Name
- the name of the vertical alignment. You can rename this
alignment.
• Start Point
- the name of the vertical alignment start point. You
can select the desired point from the list. After selecting the point,
the Northing and the Easting fields display the coordinates of the
selected point. These coordinates cannot be changed for the
selected point.
• Elevation
- the vertical alignment start point's elevation
coordinate in the current coordinate system (Grid or Ground).
You can edit the value when a point is not selected in the Start
Point field.
• Start Station / Chainage
- starting station or chainage for the
vertical alignment. You can edit the value.
X-section Properties Window
The Properties window for the X-Section of the road (only for road
with X-Section) contains the General tab
.
Properties Window: General Tab for a
X-Section
You can open the tab after selecting the Properties command from
the pop-up menu for the X-Section in the left panel of the Roads tab
.
This tab contains the Name
field, which is the name of the X-Section.
You can rename this X-Section.
Road String Set Properties Window
The Properties window for the Road String Set (for the road with
String Set) contains the General tab
.