Product Manual

Vertical Alignment Properties Window
MAGNET Tools ver 1.0
123
This tab contains the fields:
• Name
- the name of the horizontal alignment. You can rename
this alignment.
• Start Point
- the name of the horizontal alignment start point. You
can select the desired point from the list. After selecting the point,
the Northing and the Easting fields display the coordinates of the
selected point. These coordinates cannot be changed for the
selected point.
• Northing
- the horizontal alignment start point's northing
coordinate in the current coordinate system (Grid or Ground).
You can edit the value when a point is not selected in the Start
Point field.
• Easting
- the horizontal alignment start point's easting coordinate
in the current coordinate system (Grid or Ground). You can edit
the value when a point is not selected in the Start Point field.
• Start Station / Chainage
- starting station or chainage for the
horizontal alignment. You can edit the value.
Vertical Alignment Properties
Window
The Properties window for the vertical alignment of the road contains
the General tab
.
Properties Window: General Tab for a
vertical alignment
You can open the tab after selecting the Properties command from
the pop-up menu for the highlighted vertical alignment in the left
panel of the Roads tab
.
This tab contains the fields: