Product Manual

Properties Window
MAGNET Tools ver 1.0
118
Option Tab of the Option Window for
a Surface
This tab is enabled only for surfaces which were created from points
and/or lines (not converted from roads and lines). You can open this
tab after selecting the
Properties command from the pop-up menu
for the highlighted line in the Surfaces tab
. This tab contains the
fields:
• with Interior Angle <
- the minimal allowable interior angle of a
created triangle (in the current angular units). The Interior Angle
cannot be less than the set value. You can edit the parameter. By
default it is empty.
• with Area >
- the maximal allowable area of a triangle (in the
current linear units). The Area cannot be more than the set
value.You can edit the parameter. By default it is empty.
Road Tab of the Option Window for a
Surface
This tab is enabled only for surfaces which were created by
conversion from a road. You can open this tab after selecting the
Properties command from the pop-up menu for the highlighted line
in the Surfaces tab
. This tab contains the fields:
• Interval
- the interval between triangles (in the current linear unit)
set for creating the surface from the road. You can edit this
parameter.
• Level
- this value defines the level of the ground surface. After
entering the corresponding value (not empty), the application will
calculate and display in graphic mode the cut and fill for the
surface of the road taking into account this level value. The
picture
displays the surface of the road without any relation to the
ground (the field Level is empty). Then set the ground level in 10
meters and click the Update surface command. The picture