Product Manual

Surface Properties Window
MAGNET Tools ver 1.0
117
• Number of Points
– the quantity of points in the surface,
including intersection points of lines forming this model. You
cannot edit this parameter.
• Number of Triangles
– the quantity of triangles created in the
surface. You cannot edit this parameter.
• Area
– the sum of areas of the triangle projections on the
horizontal plane (if the triangulation is done with respect to the
ground plane) and the vertical plane (if the triangulation is done
with respect to a vertical plane from a focus point for the given
surface). You cannot edit this parameter.
• Minimum Northing
- the minimum value of northing
coordinates of points included in the surface. You cannot edit this
parameter.
• Maximum Northing
- the maximum value of northing
coordinates of points included in the surface. You cannot edit this
parameter.
• Minimum Easting
- the minimum value of easting coordinates of
points included in the surface. You cannot edit this parameter.
• Maximum Easting
- the maximum value of easting coordinates of
points included in the surface. You cannot edit this parameter.
• Minimum Elevation
- the minimum value of elevations of points
included in the surface. You cannot edit this parameter.
• Maximum Elevation
- the maximum value of elevations of points
included in the surface. You cannot edit this parameter.
• Comment
- any additional information about the surface.
• Need Update
- the current status of the surface. If set to "No", the
surface is not changed or the automatic update is done. If set to
"Yes", the surface is changed, and the automatic update of the
changed surface is disabled.
and checkbox:
Auto Update
- if this check box is unchecked (default setting), the
automatic update of the changed surface is disabled. If this parameter
is checked, an automatic update of the changed surface is enabled.