Product Manual

Properties Window
MAGNET Tools ver 1.0
104
Properties Window: General Tab for a
DL run (Left Panel of the DL Obs Tab)
You can open this tab, after the Properties command from the pop-
up menu for the highlighted line in the left panel of the DL Obs tab is
selected.
This tab contains the fields:
• #
- the number of the DL run (DL occupation) contained in the
current job. You can set any number from the list.
• From
- the start leveling point of the job. You cannot select
another point as the start point.
• To
-the finish leveling point of the job. You cannot select another
point as the finish point.
• Level Run
- the name of the leveling job created in a digital level.
• Date
- the start date (day/month/year) and time of the job
creation. You cannot edit the value.
• Note
- any additional DL run's note. To edit the note, click on the
highlighted field and enter your comments.
• Distance
- the sum of all backsight and foresight distances. You
cannot edit the parameter.
• Balance
- the sum of differences between the DL to BS point and
the DL to FS point of the job. You cannot edit the parameter.
and check box:
Enabled
- if this check box is selected (default setting for the DL run),
the given DL run and all objects related to the given observation(s),
are included in adjustment, coordinate calculation and export. If this
parameter is unchecked, adjustment, coordinate calculation and
export will ignore the DL run and all objects related to the given
occupation(s).