Product Manual

TS Obs Properties in the Right Panel
MAGNET Tools ver 1.0
99
• Horizontal Circle
- for the SS, FS, Horizontal Resection/Vertical
Resection/Resection types of Total Station observation. This is
the measured horizontal angle from the previous to the next
observation. For BKB type, this is the horizontal circle reading
when pointing to the backsight point. You cannot edit this
parameter.
• Zenith angle
- the vertical angle to the reflector measured from
zenith. You cannot edit this parameter.
• Slope Distance
- the slope distance between the TS station (Point
From) and the TS observation (Point To). You cannot edit this
parameter.
• Vertical Angle
- the vertical angle to the reflector measured from
the horizontal plane. You cannot edit this parameter.
• Horizontal Distance
- the distance between the TS station (Point
From) and the TS observation (Point To) in the horizontal plane.
You cannot edit this parameter.
• Vertical Distance
- the distance between the TS station (Point
From) and the TS observation (Point To) in the vertical plane.
You cannot edit this parameter.
• Note
- any additional TS observation's note. To edit the note,
click on the highlighted field and enter a user's comments.
Three check boxes are available for all types of the observations
except BKB type:
• exclude Horizontal Circle
- If the box is checked, the Horizontal
Circle measurement for this TS observation is excluded from the
adjustment, calculating coordinates and export.
• exclude Vertical Angle
- If the box is checked, the Horizontal
Circle measurement for this TS observation is excluded from the
adjustment, calculating coordinates and export.
• exclude Slope Distance
- If the box is checked, the Horizontal
Circle measurement for this TS observation is excluded from the
adjustment, calculating coordinates and export.